News and Events

Viking Tech - A professional Resistor Manufacturer of Thin Film Chip Resistor, Chip Resistor, Power Inductor, Current Sense Resistor, Thick Film Resistor, Chip Capacitor and Ceramic Substrate.

New Product Release

Latest News

Result 1 - 20 of 20
08Jun 2023
Automotive Grade Metal Thin Film Chip Resistor –ARM..A series

ARM..A series The advanced thin film resistor with special process to ensure the life stability and resistant to moisture. Biased humidity testing at 85 °C /85% and 155°C high temperature exposure tested. High Temperature Power Derating started from 85°C. Wide resistance range up to 5.1Mohm and provide good performance of high power and high voltage.

Read More
26Sep 2022
Automotive Thick Film Flat Array Chip Resistor –CNF..A series

Resistor Array is composed of several independent chip resistors. It limits the current and stabilizes the voltage. It can be used as pull-up and pull-down resistors for parallel ports, simplify the PCB design and assembly. Save board space or increase PCB integration density and reduce pick and place costs.CNF ..A series products are flat type between the terminals (no convex or concave design) so they are strong in mechanical strength and are extremely resistant to damage, so usable space can be added to the design, which increases the effective area of the resistor body, so that is better electrical characteristics. Same land patterns as concave or convex type. No need to redesign on PCB. High power is available.

Read More
05Sep 2022
Important products: Tantalum Nitride (TaN) Thin Film Precision Chip Resistor -TAR Series

The TaN (tantalum nitride) film is a moisture impervious tantalum pentoxide barrier layer that can against high relative humidity. TaN is much robust withstand high humidity with voltage applied than NiCr. It can pass thousands biased humidity testing at 85 °C /85% relative humidity . it produces a very stable, protective oxide layer, an ideal choice for a wide range of applications requiring precision resistors with long term stability, reliability, and critical environmental.

Read More
01Sep 2022
High Power Thin Film Chip Resistors 1206 1W-ARP Series

High Power Thin Film Chip Resistors 1206 1W

Read More
08Aug 2022
Thin film high voltage-ARHV..A series

Thin film high voltage-ARHV..A series * 1206,1210 Offer up to 700V-1000V voltage and provide long-term stability with special passivation. * ±25ppm/°TCR and ±0.1% resistance tolerance. * Resistance upto 3MΩGreatly reduce the number of thin film resistor for high Voltage Greatly reduce SMD costs , Saving PCB space or increase PCB integration density Higher application reliability by reducing the number of solder joints

Read More
04Mar 2022
High Frequency upto 40GHz thin film precision resistor-ARF series

ARF series chip resistors are designed with low internal reactance. The thin film technology applied to resistors is appropriated to reduce the parasitic inductance and capacitance. Low internal reactance allows these devices to keep a very good resistor behavior in high frequencies.Applications

Read More
05Nov 2021
Long Termination Thick Film Resistor- CRW Series

The resistors are constructed in a ceramic based (aluminum oxide). Long-side termination (reverse-geometry) type flat chip resistor, robust design is major concern, provide a shorter path for heat dissipation to the PCB, enhance high power rating, Wide electrode construction supports good thermal cycling performance. The composition of the paste is adjusted to give the approximate resistance required and is trimmed to nominated value by laser trimmer.

Read More
12Oct 2021
Ultra Low Resistance Metal Alloy Jumper-LRJ series

Metal alloy 0 ohm jumper resistor for ultra low resistance under 0.5mohm for sizes of 0402~0805, under 0.2mohm for sizes of 1206,2010 withstand high temperature for high current applications. Our LRJ seires is true metal alloy plate zero ohm resistor , a good choice of less space and low cost than DIP jumper headers. This Metal jumper is designed to extremely low impedance and profile circuit linkage as a zero ohm resistor.

Read More
06Sep 2021
Thick Film High Power Chip Resistor - Aluminum Nitride Substrate(ALN) –CRP Series

CRP series thick film resistor is designed on high thermal conductivity aluminum nitride substrate with enlarged backside terminations to reduce the thermal resistance between the topside resistor layer and the solder joint on the end users’ circuit assembly. It offers effiectively heat dissipation to remove the heat to the overall performance of the devices. Enhance over 3 times more power in same size , Excellent reliability and stability. It offers High Thermal Conductivity for Power to 22 W with temperature control in 2512 Case ..

Read More
20Aug 2021
New Product CSRF Series- MELF High Frequency Resistor

CSRF series is a MELF resistor specially designed for high frequency applications. The general type MELF resistor uses a spiral trimming method to increase the internal inductance, CSRF uses a special non-spiral trimmed method reduced the internal reactance which caused the impedance change when the resistor used in high frequency applications, so it is very suitable for high frequency circuit design.

Read More
15Mar 2021
Long Termination Thick Film Resistor- CRW ..A Series

The resistors are constructed in a ceramic based (aluminum oxide). Long-side termination (reverse-geometry) type flat chip resistor, robust design is major concern, provide a shorter path for heat dissipation to the PCB, enhance high power rating, Wide electrode construction supports good thermal cycling performance. The composition of the paste is adjusted to give the approximate resistance required and is trimmed to nominated value by laser trimmer.

Read More
15Mar 2021
Anti-sulfur Components

Anti-Surfur resistor is using high sulfuration-proof inner electrode material and special construction of termination to increase the strength to against the sulfuration. Sulfuration occurs in the resistor with silver for inner electrode. Sulfurated environment is included as sulfur gas near hot spring or volcanos or produced through firing of raw oil, even outdoor equipment under air pollution could be affected. Silver sulfide produced through this reaction impacts the conductivity therefore resistor gets disconnected.Viking ‘s Anti-sulfurated resistors are an ideal choice to prevent your electronic devices being damaged from the high –sulfur environment.Product applications:automotive electronic components, power supplies, industrial equipment, petrochemical industry electronic equipment, network servers, sulfur detectors, telecom stations, sewage treatment facilities, etc.

Read More
14Sep 2020
New Product Anti-Sulfur Resistor Array (AS43/ 42/ 41/ 21 Series)

Chip Resistor Array (R Network) is single packaged device containing an array of homogeneous resistor elements. Resistor array is typically used for convenience and cost or space saving when several same resistors applied in a layout. The size can be as small as 0201,4P2R or 8P4R. AS43,AS42,AS41,AS21 Resistor Arry is using special construction of termination to increase the strength to against the sulfuration. Silver sulfide produced due to high Sulfur environment that impacts the conductivity, therefore resistor gets disconnected. Viking ‘s Anti-sulfurated resistor array is an ideal choice to prevent your electronic devices being damaged from the high –sulfur environment.

Read More
29Jun 2020
New Product ARN Series

ARN Series Chip resistors are designed on high thermal conductivity Aluminum Nitride substrate with enlarged backside terminations to reduce the thermal resistance. As with any high power chip resistor has good ability to remove the heat to the overall performance of the devices. Aluminum Nitride Precision Thin Film Chip Resistor-ARN Series ● High thermal conductivity aluminum nitride substrate ● High-power resistors 1206 up to 2 watts, 2512 6W soon is coming ● Offer 2x the power rating over traditional thin-film chip resistors ● Designed with enlarged backside terminations to reduce the thermal resistance ● Low TC down to 25 ppm/C ,Tight tolerance to 0.1% Please consult with us for the new product.

Read More
29Jun 2020
New Product 4T Series

Metal Foil is special designed for 4 terminations, Kelvin design , surface-mount ,High power and Tight Tolerance of 0.5% for critical current sensing design. This resistor covers the most widely used resistance range from 10m~20m. This technology offers an excellent Temperature Coefficient of Resistance (TCR) and high reliable, accurate current detection. Four Terminal High Precision Current Sense Resistors-4T Series

Read More
15Jan 2020
New Product TAR Series

Tantalum Nitride Thin Film Resistor Chip Resistor-TAR Series

Read More
15Jan 2020
New Product CSRA Series

Automotive Grade Metal Film Precision MELF Resistor-CSRA series

Read More
15Jan 2020
New Product AR Series

Thin Film Precision Chip Resistor-AR2512 10PPM 1W

Read More
15Jan 2020
New Product PWR Series

Pulse Withstanding Chip Resistor-PWR Upgrade Power Rating

Read More
15Jan 2020
New Product SWR Series

Surge Withstanding Chip Resistor-SWR Upgrade Power Rating

Read More
Result 1 - 20 of 20

SEARCH

Condition search:      Cross Search

Menu

Best Sale

Precision Resistor | RF Inductor Manufacturer - Viking

Based in Taiwan, Viking Tech Corporation, since 1997, is an ultra-precision resistor manufacturer. And their products are used throughout automotive, electronic device applications, with manufacturing tolerance down to 0.01% and TCR down to 2 ppm in a broad range of package sizes.

TS16949/ ISO9001/ ISO14001 and meet AEC-Q200 standards, Viking has been offering anti-sulfur, anti-surge, pulse, high voltage, high power precision resistors including thin/ thick film resistors, automotive resistors, melf resistors, current sense resistors, etc. Low noise, low TC, high power inductors such as rf inductors, chip inductors, power inductors, variable inductors, ferrite chip inductors, shielded inductors, wire wound inductors and dip inductors.

Viking has been offering customers high quality power resistors, power inductors and aluminum electrolytic capacitors with solid reputation. Both with advanced technology and 25 years of experience, Viking makes sure to meet each customer's demands.


Application

AUTOMOTIVE APPLICATIONS

AUTOMOTIVE APPLICATIONS

Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...

Read More
MEDICAL APPLICATIONS

MEDICAL APPLICATIONS

Ceramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...

Read More
COMMUNICATION APPLICATIONS

COMMUNICATION APPLICATIONS

Multilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...

Read More